Suflex Flexible Tubing Products
Fiberglass Flexible Tubing Coated or Treated |
Astratite® ASR Class 135° C
 |
Astratite® ASR-C Class 135° C
 |
Astratite® AVF Class 125° C
 |
ASTRATITE Type ASR vacuum pressure impregnated
tubing is a semi-rigid cross-linked polyolefin heat shrinkable tubing
that will recover to half its original diameter when heated to 135°C
or higher.
During the shrinking operation, vacuum pressure impregnated tubing will encapsulate
any device inside of it at the time and will assume the contour of that device.
It is useful for skin-tight covering of splices, resistors, diodes, mechaical
parts, terminations, etc.
Vacuum Pressure Impregnated Tubing |
ASTRATITE ASR-C heat shrinkable tubing is designed
particularly as an electrical terminal insulation with mechanical
support. It is flame retarded, heat resistant, corrosion resistant
and solvent resistant.
PVC heat shrinkable tubing exhibits outstanding abrasion and impact resistance,
and is recommended where mechanical, as well as electrical protection of
parts is required.
PVC Heat Shrinkable Tubing |
ASTRATITE Type AVF cross linked flexible polyolefin
tubing is an exceptionally flexible, highly flame retarded tubing
with an exceptionally low recovery temperature. It will fully recover
in approximately five minutes depending on oven conditions and item
being covered.
It is useful for skin-tight covering of splices, resistors, diodes,
mechanical parts, terminations, etc. AVF tubing is superior to other
heat shrinkable polyolefin tubings in that it passes the very stringent
flammability test of ASTM D876.
Silicone
Braided Coated Sleeving |
Astratite® VC Class 105° C
 |
Astratite® VC-TW Class
105° C
 |
Astratite® AF Class
125° C
 |
|
ASTRATITE Type VC tubing is a polyvinylchloride
heat shrinkable tubing that will recover to half its original diameter
when heated to 135°C or higher.
It is useful for skin-tight covering of splices, resistors, diodes, mechanical
parts, terminations, antennas, etc.
Vinyl Chloride Tubing
|
Resistors, capacitors, bus bars and antenna parts
can be covered by ASTRATITE VC-TW vinylchloride tubing. Ourvinylchloride
tubing can also be used as protection for antenna load coils. Abrasion
resistance and thermal stability are excellent.
Clear PVC Tubing
|
ASTRATITE Type AF is a flexible cross-linked polyolefin
heat shrinkable tubing that will recover to half its original diameter
when heated to 120°C or higher.
During the shrinking operation, flexible polyolefin tubing will encapsulate
any device inside of it at the time, and will assume the contour of that
device.
It is useful for skin-tight covering of splices, resistors, diodes, mechanical
parts, terminations, etc.
Astratite-AF Semi Rigid Tubing |
Astra© 701 Flexible PVC Tubing
|
Astra 077® PVC Tubing
|
Astra 703/105® PVC Class 105° C
|
|
ASTRA 701 low temperature flexible PVC tubing finds
applications in appliances, electric motors, commercial and military
aircraft, automotive components and a host of other installations.
Its low temperature characteristics make this low temperature flexible
PVC tubing particularly useful in airborne equipment, electrical
harnesses, motorcycles and snow machines.
PVC Mechanical Tubing
|
ASTRATITE Type VC tubing is a polyvinylchloride
heat shrinkable tubing that will recover to half its original diameter
when heated to 135°C or higher.
It is useful for skin-tight covering of splices, resistors, diodes, mechanical
parts, terminations, antennas, etc.
Flexible PVC Tubing |
ASTRA 703/105 mechanical tubing is high heat-resistant,
extruded polyvinyl-chloride plastic tubing designed for continuous
use in 105°C applications. This material carries the Underwriters
Laboratories recognition and is rated VW-1 by the Laboratories.
ASTRA 703/105 PVC mechanical tubing is supplied in continuous lengths on
spools and in cut pieces.
PVC Mechanical Tubing |
| |
Astra© 601 Extruded PVC Tubing
|
|
| |
ASTRA 601 low temperature PVC tubing is an extruded
polyvinylchloride tubing manufactured to withstand temperatures
as low as -70°C.
ASTRA 601 low temperature extruded PVC tubing is recommended for
harnessing, cable or conduit installations, especially where very
low temperatures are to be encountered such as airborne devices,
aircraft, missiles and snow machine wiring harness jackets.
Extruded LowTemperature PVC Tubing |
|
QSR Certificate Number: QSR-831 |
