Clear PVC Tubing Description: |
For
more info on: Clear
PVC Heat Shrinkable Tubing
ASTRATITE
VC-TW Clear PVC Tubing is a polyvinylchloride heat shrinkable
tubing manufactured with a thin wall for use when the voltage is
low and flexibility of the insulated part is required. The insulation
is identical to ASTRATITE VC heat shrinkable Tubing, but wall thickness
is less, providing the improved flexibility.
ASTRATITE VC-TW vinylchloride tubing recovers approximately
40% in diameter as opposed to 50% for the heavier-walled ASTRATITE
VC PVC Heat Shrinkable Tubing.
When recovered, ASTRATITE VC-TW
Clear PVC Tubing will exhibit less longitudinal shrinkage
than competitive tubings. Shelf stability is generally greater
than competitive tubings.
When recovered on a part, it will conform to the contour of that
part providing a skin-tight covering that will shield the part
from dirt, moisture, or corrosive environments.
Resistors, capacitors,
bus bars and antenna parts can be covered by ASTRATITE VC-TW
vinylchloride tubing. Ourvinylchloride tubing can also be
used as protection for antenna load coils. Abrasion resistance
and thermal stability are excellent.
ASTRATITE
VC-TW vinylchloride tubing is manufactured to conform to Underwriters
Laboratories UL 224 Standard for Safety: Extruded Thermoplastic
Insulating Tubing, Table 25.5 and passes the VW-1 flammability
test.
It is recommended for continuous use up to 105°C. Recommended
shrinking conditions are 135°C
for 3 minutes. ASTRATITE VC-TW vinylchloride tubing has the following
characteristics when tested according to UL 224, Table 25.5. |
